GE AK2540TM (1206802)
The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and high sodium chloride rejection. AG Standard Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psi (1,379 kPa) are desired. These elements allow mod-erate energy savings, and are considered a standard in the industry.
A-series, thin-film membrane (TFM*)
40 in x 2.4 in
|Average Permeate Flow
• Average salt rejection after 24 hours operation. Individual flow rate may vary ± 20%.
• Testing conditions: 2,000 ppm NaCl solution at 225psi (1,551 kPa) operating pressure, 77°F (25°C), pH 7.5 and 15% recovery.
Operating and Cleaning Limits
|Typical Operating Pressure||Typical Operating Flux||Maximum Operating Pressure, Tape||Maximum Operating Pressure, Other Outerwrap||Maximum Temperature, Continuous Operation||Maximum Temperature, Clean-In-Place (CIP)||pH Range, Optimum Rejection||pH Range, Continuous Operation||pH Range, Clean-In-Place (CIP)||Maximum Pressure Drop, Over An Element||Maximum Pressure Drop, Per Housing||Chlorine Tolerance||Feedwater NTU||Feedwater SDI|
|200 psi (1,379 kPa)||10-20 GFD (15-35 LMH)||450 psi (3,103 kPa)||122°F (50°C)||122°F (50°C)||7.0-7.5||4.0-11.0||2.0-11.5||12 psi (83 kPa)||50 psi (345 kPa)||1,000+ ppm-hours||NTU < 1||SDI < 5|