Bumblebee Linens

GE AG4040C (1206757)

GE AG4040C (1206757)

The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and high sodium chloride rejection. AG Standard Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psi (1,379 kPa) are desired. These elements allow moderate energy savings, and are considered a standard in the industry.

Product Type
A-series, thin-film membrane (TFM*)

40 in x 3.9 in

Product Specifications

Average Permeate Flow
Average NaCl
Rejection (%)
Minimum NaCl
Rejection (%)
(GPD) (m³/d)
2,400 9.1 99.5 99.0

• Average salt rejection after 24 hours operation. Individual flow rate may vary ± 20%.
• Testing conditions: 2,000 ppm NaCl solution at 225psi (1,551 kPa) operating pressure, 77°F (25°C), pH 7.5 and 15% recovery.

Operating and Cleaning Limits

Typical Operating Pressure Typical Operating Flux Maximum Operating Pressure, Tape Maximum Operating Pressure, Other Outerwrap Maximum Temperature, Continuous Operation Maximum Temperature, Clean-In-Place (CIP) pH Range, Optimum Rejection pH Range, Continuous Operation pH Range, Clean-In-Place (CIP) Maximum Pressure Drop, Over An Element Maximum Pressure Drop, Per Housing Chlorine Tolerance Feedwater NTU Feedwater SDI
200 psi (1,379 kPa) 10-20 GFD (15-35 LMH) 600 psi (4,137 kPa) 122°F (50°C) 122°F (50°C) 7.0-7.5 4.0-11.0 2.0-11.5 12 psi (83 kPa) 50 psi (345 kPa) 1,000+ ppm-hours NTU < 1 SDI < 5
Product Type